Pass4sure 70 649 Dumps with Real Questions amp Practice Test

Pass4sure 70 649 Dumps With Real Questions Amp Practice Test-PDF Download

  • Date:02 Dec 2019
  • Views:48
  • Downloads:0
  • Pages:11
  • Size:1.10 MB

Share Pdf : Pass4sure 70 649 Dumps With Real Questions Amp Practice Test

Download and Preview : Pass4sure 70 649 Dumps With Real Questions Amp Practice Test


Report CopyRight/DMCA Form For : Pass4sure 70 649 Dumps With Real Questions Amp Practice Test


Description:

2003 and Microsoft Exchange Server 2007 The company wants to deploy a new Exchange server named Server3 to receive all inbound e mail traffic You need to configure DNS to direct incoming e mail traffic to the Exchange servers You also need to ensure that higher priority is given to Server3 What should you do

Transcription:

QUESTION 243, You are building a test environment to evaluate DNS Security Extensions DNSSEC. You have a domain controller named Server1 that runs Windows Server 2008 R2 in. your test environment Server1 has the DNS Server server role installed You need to. configure Server1 to support the DNSSEC evaluation Which two actions should you. perform Each correct answer presents part of the solution Choose two. A Create a new Quad A AAAA DNS record,B Create a new Signature SIG DNS record. C Create a new Public key KEY DNS record,D Create a new Well known service WKS DNS record. Answer B C,QUESTION 244, Your company has a domain controller that runs Windows Server 2008 R2 and the. DNS role The DNS domain is named contoso com You need to ensure that inquiries. about contoso com are sent to dnsadmin contoso com What should you do. A Create a Signature SIG record for the domain controller. B Modify the Name Server NS record for the domain controller. C Modify the Service Location SRV record for the domain controller. D Modify the Start of Authority SOA record on the domain controller. QUESTION 245, Your company has a domain controller named Server1 that runs Windows Server.
2008 R2 and the DNS server role A server named Server2 runs Windows Server. 2003 and Microsoft Exchange Server 2007 The company wants to deploy a new. Exchange server named Server3 to receive all inbound e mail traffic You need to. configure DNS to direct incoming e mail traffic to the Exchange servers You also. need to ensure that higher priority is given to Server3 What should you do. A Set the priority value of the Server2 Mail Exchanger MX record to 20 Create a. new Mail Exchanger MX record for Server3 Set the priority value to 5. B Set the priority value of the Server2 Mail Exchanger MX record to 5 Create a. new Mail Exchanger MX record for Server3 Set the priority value to 20. C Create a new Service Location SRV record in the domain for Server3 Set the. port number value to 25 Configure the priority setting to 20. D Create a new Service Location SRV record in the domain for Server3 Set the. port number value to 110 Configure the priority setting to 5. QUESTION 246, Your company has a domain controller named Server1 that runs Windows Server. 2008 R2 and the DNS Server server role A server named Server2 runs a custom. application You need to configure DNS to include the following parameters for the. custom application,Port number,Host offering this service. Which record should you create,A Host Info HINFO,B Service Location SRV. C Canonical Name CNAME,D Well Known Service WKS,QUESTION 247. Your company has a domain controller named Server1 that runs Windows Server. 2008 R2 Server1 has the DNS Server server role installed You need to configure. the DNS server to resolve IP addresses to host names Which record should you. A Pointer PTR,B Host Info HINFO,C Service Location SRV.
D Canonical Name CNAME,QUESTION 248, Your company has a main office and two branch offices Domain controllers in the. main office host an Active Directory integrated zone The DNS servers in the branch. offices host a secondary zone for the domain and use the main office DNS servers as. their DNS Master servers for the zone The company adds a new branch office You. add a member server named Branch3 and install the DNS Server server role on the. server You configure a secondary zone for the domain The zone transfer fails You. need to configure DNS to provide zone data to the DNS server in the new branch. office What should you do,A Run dnscmd by using the ZoneResetMasters option. B Run dnscmd by using the ZoneResetSecondaries option. C Add the new DNS server to the Zone Transfers tab on one of the DNS servers in. the main office, D Add the new DNS server to the DNSUpdateProxy Global security group in Active. Directory Users and Computers,QUESTION 249, Your company has a main office and a branch office The main office has a domain. controller named DC1 that hosts a DNS primary zone The branch office has a DNS. server named SRV1 that hosts a DNS secondary zone All client computers are. configured to use their local server for DNS resolution You change the IP address of. an existing server named SRV2 in the main office You need to ensure that SRV1. reflects the change immediately What should you do. A Restart the DNS Server service on DC1, B Run the dnscmd command by using the zonerefresh option on DC1.
C Run the dnscmd command by using the zonerefresh option on SRV1. D Set the refresh interval to 10 minutes on the Start of Authority SOA record. QUESTION 250, Your company has a single Active Directory domain The company has a main office. and a branch office Both the offices have domain controllers that run Active. Directory integrated DNS zones All client computers are configured to use the local. domain controllers for DNS resolution The domain controllers at the branch office. location are configured as Read Only Domain Controllers RODC You change the. IP address of an existing server named SRV2 in the main office You need the branch. office DNS servers to reflect the change immediately What should you do. A Run the dnscmd ZoneUpdateFromDs command on the branch office servers. B Run the dnscmd ZoneUpdateFromDs command on a domain controller in the. main office, C Change the domain controllers at the branch offices from RODCs to standard. domain controllers, D Decrease the Minimum default TTL option to 15 minutes on the Start of. Authority SOA record for the zone,QUESTION 251, Your company has a single Active Directory domain The company has a main office. and three branch offices The domain controller in the main office runs Windows. Server 2008 R2 and provides DNS for the main office and all of the branch offices. Each branch office contains a file server that runs Windows Server 2008 R2 Users in. the branch offices report that it takes a long time to access network resources You. confirm that there are no problems with WAN connectivity or bandwidth You need. to ensure that users in the branch offices are able to access network resources as. quickly as possible Which two actions should you perform Each correct answer. presents part of the solution Choose two, A Configure a standard primary zone in each of the branch offices.
B Configure forwarders that point to the DNS server in the main office. C Configure a secondary zone in each of the branch offices that uses the main office. DNS server as a master, D Install DNS servers in each of the branch offices. Answer C D,QUESTION 252, Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role You also. have a server named ServerCore that runs a Server Core installation of Windows. Server 2008 R2 All computers are configured to use only Server1 for DNS. resolution The IP address of Server1 is 192 168 0 1 The network interface on all the. computers is named LAN Server1 is temporarily offline A new DNS server named. Server2 has been configured to use the IP address 192 168 0 254 You need to. configure ServerCore to use Server2 as the preferred DNS server and Server1 as the. alternate DNS server What should you do, A Run the netsh interface ipv4 add dnsserver LAN static 192 168 0 254 index 1. B Run the netsh interface ipv4 set dnsserver LAN static 192 168 0 254 192 168 0 1. both command, C Run the netsh interface ipv4 set dnsserver LAN static 192 168 0 254 primary. command and the netsh interface ipv4 set dnsserver LAN static 192 168 0 1 both. D Run the netsh interface ipv4 set dnsserver LAN static 192 168 0 254 primary. command and the netsh interface ipv4 add dnsserver LAN static 192 168 0 1. index 1 command,QUESTION 253, Your company has an Active Directory domain named ad contoso com All client.
computers run Windows 7 The company has recently acquired a company that has an. Active Directory domain named ad fabrikam com A two way forest trust is. established between the ad fabrikam com domain and the ad contoso com domain. You need to edit the ad contoso com domain Group Policy object GPO to enable. users in the ad contoso com domain to access resources in the ad fabrikam com. domain What should you do, A Configure the DNS Suffix Search List option to ad contoso com ad fabrikam com. B Configure the Allow DNS Suffix Appending to Unqualified Multi Label Name. Queries option to True, C Configure the Primary DNS Suffix option to ad contoso com ad fabrikam com. Configure the Primary DNS Suffix Devolution option to True. D Configure the Primary DNS Suffix option to ad contoso com ad fabrikam com. Configure the Primary DNS Suffix Devolution option to False. QUESTION 254, Your company has a single Active Directory forest that has a domain in North. America named na contoso com and a domain in South America named. sa contoso com The client computers run Windows 7 You need to configure the. client computers in the North America office to improve the name resolution response. time for resources in the South America office What should you do. A Configure a new Group Policy object GPO that disables the Local Link. Multicast Name Resolution feature Apply the policy to all the client computers in the. North America office, B Configure a new Group Policy object GPO that enables the Local Link Multicast. Name Resolution feature Apply the policy to all the client computers in the North. America office, C Configure a new Group Policy object GPO that configures the DNS Suffix.
Search List option to sa contoso com na contoso com Apply the policy to all the. client computers in the North America office, D Configure the priority value for the Service Location SRV records on each of the. North America domain controllers to 5,QUESTION 255. Your network contains two servers named Server1 and Server2 that run Windows. Server 2008 R2 From Server1 you create a collector initiated subscription that uses. Server2 as a source computer You verify the event subscription and discover the. error message shown in the exhibit Click the Exhibit button. You need to ensure that the subscription collection runs successfully What should. A On Server1 run winrm quickconfig,B On Server2 run winrm quickconfig. C From the properties of the subscription modify the User Account options. D From the properties of the subscription modify the Protocol and Port options. QUESTION 256, Your company has a single Active Directory domain The domain has servers that run. Windows Server 2008 R2 You have a server named NAT1 that functions as a NAT. server You need to ensure that administrators can access a server named RDP1 by. using Remote Desktop Protocol RDP What should you do. A Configure NAT1 to forward port 389 to RDP1,B Configure NAT1 to forward port 1432 to RDP1.
C Configure NAT1 to forward port 3339 to RDP1,D Configure NAT1 to forward port 3389 to RDP1. QUESTION 257, Your network contains one Active Directory domain You have a member server. named Server1 that runs Windows Server 2008 R2 The server has the Routing and. Remote Access Services role service installed You implement Network Access. Protection NAP for the domain You need to configure the Point to Point Protocol. PPP authentication method on Server1 Which authentication method should you. A Challenge Handshake Authentication Protocol CHAP. B Extensible Authentication Protocol EAP, C Microsoft Challenge Handshake Authentication Protocol version 2 MS CHAP v2. D Password Authentication Protocol PAP,QUESTION 258. Your network contains a server that runs Windows Server 2008 R2 The server has. the Network Policy and Access Services server role installed You need to allow only. members of a global group named Group1 VPN access to the network What should. A Add Group1 to the RAS and IAS Servers group, B Add Group1 to the Network Configuration Operators group.
C Create a new network policy and define a group based condition for Group1 Set. the access permission of the policy to Access granted Set the processing order of the. policy to 1, D Create a new network policy and define a group based condition for Group1 Set. the access permission of the policy to Access granted Set the processing order of the. policy to 3,QUESTION 259, Your company has Active Directory Certificate Services AD CS and Network. Access Protection NAP deployed on the network You need to ensure that NAP. policies are enforced on portable computers that use a wireless connection to access. the network What should you do, A Configure all access points to use 802 1X authentication. B Configure all portable computers to use MS CHAP v2 authentication. C Use the Group Policy Management Console to access the wireless Group Policy. settings and enable the Prevent connections to ad hoc networks option. D Use the Group Policy Management Console to access the wireless Group Policy. settings and disable the Prevent connections to infrastructure networks option. QUESTION 260, Your company has a server named FS1 FS1 hosts the domain based DFS namespace. named contoso com dfs All domain users store their data in subfolders within the. DFS namespace You need to prevent all users except administrators from creating. new folders or new files at the root of the contoso com dfs share What should you. A Run the dfscmd exe FS1 dfs restore command on FS1. B Configure the NTFS permissions for the C DFSroots dfs folder on FS1 Set the. Create folders append data special permission to Deny for the Authenticated Users. group Set the Full Control permission to Allow for the Administrators group. C Start the Delegate Management Permissions Wizard for the DFS namespace. named contoso com dfs Remove all groups that have the permission type Explicit. except the Administrators group, D Configure the FS1 dfs shared folder permissions Set the permissions for the.
Authenticated, Users group to Reader Set the permissions for the Administrators group to Co owner. For More exams visit https killexams com,Kill your exam at First Attempt Guaranteed.

Related Books