23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE

23 Outside Services Mhi Product Rr Plc End Use -PDF Download

  • Date:15 May 2020
  • Views:10
  • Downloads:0
  • Pages:12
  • Size:225.91 KB

Share Pdf : 23 Outside Services Mhi Product Rr Plc End Use

Download and Preview : 23 Outside Services Mhi Product Rr Plc End Use


Report CopyRight/DMCA Form For : 23 Outside Services Mhi Product Rr Plc End Use


Description:

23 outside services mhi product rr plc end use a general a 1 rolls royce plc is the end user a 2 during performance of this order your quality control systems and manufacturing process are subject to review verification analysis and approval by tct mitsubishi heavy industries mhi and authorized rolls royce and faa representatives a 3 tct mhi rolls royce and the faa

Transcription:

23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE, ADJUSTMENT UNDER THE CHANGE CLAUSE OR ANY TERMINATION CLAUSE TCT. MAKES NO GUARANTEE WARRANTY OR ANY OTHER REPRESENTATION THAT ANY OF. THE QUANTITIES STATED IN THIS AGREEMENT WILL IN FACT BE REQUIRED ANY. COST SELLER INCURS OUTSIDE THE AGREED UPON LEAD TIME IN ANTICIPATION. OF RELEASED REQUIREMENTS WILL BE SOLELY AT THE SELLER S OWN RISK AND. TCT ASSUMES NO LIABILITY THEREFOR, A 8 ANY EXPEDITED DELIVERY COSTS E G AIR FREIGHT CAUSED BY. NON ADHERENCE TO THE PURCHASE ORDER SCHEDULE AND NEGOTIATED LEAD TIMES. SHALL BE THE RESPONSIBILITY OF THE SUPPLIER,B QUALITY SYSTEMS. B 1 SUPPLIER AND ALL SUBTIER SUPPLIERS MUST BE CERTIFIED TO AS9100. UNLESS OTHERWISE AUTHORIZED REFERENCE B 2, B 2 SUPPLIER S QUALITY SYSTEM MUST CONFORM TO MHI QUALITY ASSURANCE OPERATING PROCEDURE. MS8 4518 AND THE ROLLS ROYCE SABRE, MANUAL AVAILABLE AT WWW SUPPLIERMANAGER ONLINE COM.
B 4 SUPPLIER IS RESPONSIBLE FOR FLOWING DOWN AND FOR ENSURING. ADHERENCE TO THE REQUIREMENTS OF THIS PURCHASE ORDER BY ALL SUB TIERS. B 5 NADCAP AND ROLLS ROYCE APPROVAL FOR PERFORMING SPECIAL PROCESSES. IS REQUIRED, B 6 SUPPLIER WILL RETAIN ALL RECORDS IN ACCORDANCE WITH THE ROLLS. ROYCE SABRE MANUAL AND WILL MAKE THESE RECORDS AVAILABLE TO TCT UPON. REQUEST WITHIN 24 HOURS UNLESS OTHERWISE SPECIFIED RECORDS SHALL BE. RETAINED IN ACCORDANCE WITH THE REQUIREMENTS FOR ROLLS ROYCE PLC CLASSIFIED PARTS. B 7 AS REQUIRED TO VERIFY PRODUCTS AND PROCESSES SUPPLIER SHALL USE. 23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE, AND MAINTAIN CALIBRATED INSPECTION AND TEST EQUIPMENT IN ACCORDANCE. WITH ANSI NCSL Z540 1 ISO 10012 AND ISO IEC 17025 AS APPLICABLE. C SOURCE SUBSTANTIATION AND FIRST ARTICLE REQUIREMENTS. C 1 SPECIAL PROCESSES SHALL NOT BE PERFORMED WITHOUT WRITTEN. AUTHORIZATION VIA BLUEPRINT P O OR SIMILAR PER RPS900 ROLLS. ROYCE APPROVED DATA CARDS MUST BE USED FOR ALL SPECIAL PROCESSES. INCLUDING WATERJET CUTTING TO RPS689 DATA CARDS AND PROCEDURES FOR NDT X RAY FPI MPI. ETC MUST BE APPROVED BY A ROLLS ROYCE APPROVED NDT LEVEL III NO CHANGES MAY BE MADE TO. APPROVED SOURCES OR PROCESSES WITHOUT TCT AND OR MHI APPROVAL AS APPLICABLE. C 3 UNLESS OTHERWISE SPECIFIED ON THE PURCHASE ORDER A FIRST. ARTICLE SHALL BE MANUFACTURED AND INSPECTION RESULTS SHALL BE. DOCUMENTED IN ACCORDANCE WITH AS9102 AND ROLLS ROYCE SABRE MANUAL. SECTION FAIR AND COMPONENT PROVING BOTH THE PRODUCT AND INSPECTION. RESULTS SHALL BE SUBMITTED TO AND APPROVED BY TCT ENGINEERING AND OR. ROLLS ROYCE IF APPLICABLE PRIOR TO CONTINUING PRODUCTION. D PRODUCT REQUIREMENTS, D 1 UNLESS OTHERWISE APPROVED IN WRITING BY TCT OR ROLLS ROYCE 100. INSPECTION TO THE BLUEPRINT B P REQUIREMENTS SHALL BE PERFORMED ON. ALL PRODUCT PRIOR TO SHIPMENT ALL SAMPLING PLANS SUBMITTED FOR. APPROVAL SHALL BE STATISTICALLY VALIDATED USING A SAMPLE SIZE OF AT. LEAST 25 ONCE APPROVED SPC METHODS SHALL CONTINUE TO BE USED TO. ENSURE THE PROCESS CAPABILITY CPK IS MAINTAINED AT OR ABOVE A 1 3. D 2 TRACEABILITY TO THE TCT ASSIGNED LOT NUMBER OR SERIAL NUMBER IF. APPLICABLE SHALL BE MAINTAINED FOR ALL TCT SUPPLIED MATERIALS. PRODUCT DURING ALL STAGES OF PROCESSING THROUGH SHIPMENT TO TCT. 23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE, SIMILARLY HEAT NUMBER OR LOT TRACEABILITY SHALL BE MAINTAINED. RELATIVE TO THE TCT ASSIGNED LOT SERIAL NUMBER FOR ALL OTHER MATERIALS. INCORPORATED INTO THE PRODUCT, D 3 UNLESS PARTS ARE ALREADY UNIQUELY IDENTIFIED UPON RECEIPT AND.
THAT MARKING IS NOT OBLITERATED DURING PROCESSING PRODUCT SHALL BE. TAGGED OR INK MARKED USING TEMPORARY INK IN AN AREA NOT DETRIMENTAL. TO THE PRODUCT WITH THE TCT ASSIGNED LOT NUMBER HAVING THE FORM OF. P0XXXXXX WHERE LARGE QUANTITIES OF PARTS HAVE BEEN ASSIGNED THE SAME. LOT NUMBER MARKING OF INDIVIDUAL PARTS IS NOT REQUIRED PROVIDED THE. PARTS ARE SEGREGATED IN SEPARATE CONTAINERS BAGS BOXES ETC AS. APPROPRIATE AND EACH INDIVIDUAL CONTAINER IS CLEARLY IDENTIFIED WITH. THE TCT ASSIGNED LOT NUMBER, D 5 ANY SPECIALTY METALS INCORPORATED IN ARTICLES DELIVERED UNDER. THIS PO SHALL BE MELTED IN THE UNITED STATES OR OTHER QUALIFYING. COUNTRY IN ACCORDANCE WITH DFARS CLAUSE 252 225 7014 PREFERENCE. FOR DOMESTIC SPECIALTY METALS AND DFARS CLAUSE 225 872 1 CONTRACTING WITH QUALIFYING. COUNTRY SOURCES GENERAL,E SHIPPING REQUIREMENTS, E 1 PACKAGING SHALL BE ADEQUATE TO PREVENT DAMAGE AS WELL AS. EXCESSIVE SHIFTING DURING TRANSIT, E 2 ALL CONTAINERS OVER 50 LB GROSS WEIGHT SHALL BE PLACED ON A. PALLET TO ENABLE MECHANICAL HANDLING, E 3 PAPER CARDBOARD OR OTHER SUITABLE MEANS SHALL BE USED TO. PREVENT METAL TO METAL CONTACT BETWEEN ALL MACHINED FINISHED SURFACES. OF PRODUCT,23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE.
E 4 PACKAGING SHALL BE CLEARLY IDENTIFIED WITH THE FOLLOWING. INFORMATION SUPPLIER NAME P O NUMBER PART NUMBER OR PRODUCT. DESCRIPTION AND TCT ASSIGNED LOT NUMBER OR SERIAL NUMBER. F DOCUMENTATION REQUIREMENTS, F 1 PACKING SLIP WHICH INCLUDES SUPPLIER S INFORMATION THE PART. NUMBER AND QUANTITY BEING SHIPPED THE PACKING SLIP NUMBER AND THE. P O NUMBER INCLUDING LINE AND RELEASE NUMBERS, F 2 CERTIFICATE OF CONFORMANCE WHICH INCLUDES SUPPLIER S. INFORMATION THE PART NUMBER AND QUANTITY BEING SHIPPED TCT ASSIGNED. LOT NUMBER S THE PACKING SLIP NUMBER REFERENCE TO DOCUMENTATION. AUTHORIZING SHIPMENT OF NONCONFORMING PRODUCT IF APPLICABLE AND THE. P O NUMBER, F 5 DOCUMENTATION FROM TCT AUTHORIZING SHIPMENT OF NONCONFORMING. PRODUCT IF APPLICABLE WHICH REFERENCES THE P O NUMBER PART NUMBER TCT ASSIGNED LOT. NUMBER S AND QUANTITY AUTHORIZED FOR,G NONCONFORMING PRODUCT. G 1 IF TCT ENGINEERING HAS AGREED IN WRITING PRIOR TO SHIPMENT TO. ACCEPT NONCONFORMING PRODUCT IN ITS CURRENT CONDITION THE SUPPLIER. SHALL SUPPLY A SEPARATE CERTIFICATE OF CONFORMANCE FOR THE. NONCONFORMING PRODUCT REFERENCING THE P O NUMBER PART NUMBER. TCT ASSIGNED LOT NUMBER OR SERIAL NUMBER QUANTITY ETC THE DOCUMENT. SHALL ALSO STATE THAT THE PRODUCT DOES NOT FULLY CONFORM TO THE. PURCHASE ORDER REQUIREMENTS AND SHALL IDENTIFY AND TAKE EXCEPTION TO. 23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE, THE SPECIFIC NONCONFORMANCES IDENTIFIED SUPPLIER SHALL ALSO INCLUDE.
DOCUMENTATION FROM TCT AUTHORIZING ITS SHIPMENT, G 2 IF PRODUCT IS FOUND TO BE NONCONFORMING UPON RECEIPT BY TCT AND. WITHOUT PRIOR NOTIFICATION OF THE NONCONFORMANCE BY THE SUPPLIER AND. SHIPMENT AUTHORIZATION BY TCT AND IS DEEMED BY TCT ENGINEERING TO BE. REWORKABLE TO A USABLE CONDITION SUPPLIER MAY BE HELD RESPONSIBLE FOR. ALL COSTS INCURRED BY TCT ASSOCIATED WITH REWORKING THE PRODUCT UP TO. ITS ORIGINAL PURCHASE PRICE, G 3 WHEN SHIPPING TO TCT NONCONFORMING PRODUCT SHALL BE PHYSICALLY. IDENTIFIED USING A TEMPORARY METHOD OF IDENTIFICATION PREFERABLY A. RED TAG NONCONFORMING PRODUCT WHEN SHIPPED WITH CONFORMING. PRODUCT SHALL BE SEGREGATED IN SEPARATE BAGS BOXES OR OTHER. APPROPRIATE PACKAGING THE PACKING SLIP SHALL IDENTIFY THE. NONCONFORMING PRODUCT QUANTITY AND IDENTIFICATION TRACEABILITY. SEPARATELY FROM THE CONFORMING PRODUCT,REV 03 05 2012 NEW. 23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE,23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE. 23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE,23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE.
23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE,23 OUTSIDE SERVICES MHI PRODUCT RR PLC END USE.

Related Books